Kontakt 8.2 Update

[MagicRuss]

Adds new Patterns tool (Polyphonic step arpeggiator)

Fixes some corrupt GUI issues and issues being hosted in Komplete Kontrol.

5

[Frank]

Change log:

The currently available software version is 8.2.0. Please make sure that your installation is up to date.

——————————

8.2.0 – 2025-02-12

OVERALL CHANGES

ADDED Patterns Tool – A new polyphonic step arpeggiator
FIXED Excessively long wait times when saving/loading DAW projects containing Kontakt
FIXED Corrupted user interface when loading certain older instruments
FIXED If hosted, Kontakt 8 would cause a crash when closing Komplete Kontrol 3
FIXED Blank user interface for Electric Keys Diamond, Phoenix, and Alicia Keys
FIXED Crash when Drag+Drop onto the Rack
FIXED User-saved Multis have incorrect Browser Bank Values
FIXED Erroneous warning message when importing Kontakt content with .ncw files
FIXED File type banner text could spill into the user interface if Kontakt is set to minimum size
FIXED Tempo sync issues between Kontrol S MK3 and Kontakt
IMPROVED Use the modern (Vista and above) file open dialog on Windows when locating Folders

LEAP CHANGES

FIXED Changing sample rate breaks waveform visuals in Leap
FIXED Leap Macros and Save/Load of global presets would break after periods of inactivity in Logic Pro
FIXED Quickly bypassing the amp and releasing a key could cause hanging notes in Leap
FIXED Samples no longer lose sync when set to Legato Playback in Leap
FIXED Time and pre-delay values in Send FX do not report automation correctly in sync mode
FIXED Changing global tonality in Leap was momentarily delayed, causing notes to briefly play in the incorrect key
FIXED Speeding Leap playback Up/Down will throw currently playing loops out of time
FIXED Speed can no longer be set to 0% as this would cause no sounds to trigger
FIXED Playing one-shots in Legato Mode when quantized and in the same choke group can prevent voices from playing in Leap
FIXED Leap samples do not respond to MIDI pitch bend
FIXED Empty slots in Leap are inconsistently grayed out
FIXED Leap sample start/end points are not reset when replacing a sample
FIXED In classic engine mode, switching to non-ping-pong mode can cause a loop to play in reverse with the reverse button not active
FIXED Notes randomly not playing when triggered from the on-screen keyboard in Leap’s Single Mode
FIXED Muzak Macro preset in Leap was saved with incorrect Delay and Reverb Macros
FIXED Toggling sync on/off in delay and reverb FX causes values to jump unexpectedly in Leap
FIXED Position indicator ring displays incorrectly when duplicating a sample in Leap
FIXED Grid is sometimes incorrect after duplicating grids in Leap
FIXED Replacing a file with modified start/end points can sometimes cause start/end points to not display in Leap
FIXED Start marker in Leap can sometimes disappear
FIXED Duplicating a REX file shows, but does not respect or use the start and end points of the copied sample
FIXED “Edit All Samples” in Leap doesn’t work for Perform and Macro FX Toggles
FIXED Anonymous usage data tracking of Leap for opted-in users
ADDED Command+Click sets a parameter to its default value
ADDED Support for BPM and ID3v2 when importing samples to Leap
ADDED Replaced group/single text switches with buttons for better usability
ADDED Time sync parameter for Global FX

TOOLS CHANGES

FIXED MIDI Note Off events not sent for the Chords Tool for notes not in scale

BUILDER CHANGES

ADDED Komplete UI first public release
ADDED Noise options for the Wavetable Modulation Oscillator
ADDED Blend mode for Wavetable source module’s Modulation Oscillator
FIXED Some MIDI CCs interpreted erroneously as CC 0, breaking KSP multi scripts
FIXED Stop writing library.json in binary format
FIXED Changes made when in mono instances of any stereo FX will not be reflected in the second instance when switching mono off via KSP
FIXED Crash in Wavetable Oscillator
FIXED KSP: dont_use_machine_mode() does not bypass TMPro polyphony limitations
FIXED API: get_instrument_options() doesn’t work with encoded instruments

2

[peter]

A “new polyphonic step arpeggiator” sounds very interesting. I’m definitely looking forward to checking that out.

LinkedMusicians Founder. Your friend who keeps the beat.

Check out my music. 

2

[MagicRuss]

On Frank said

Change log:

The currently available software version is 8.2.0. Please make sure that your installation is up to date.

——————————

8.2.0 – 2025-02-12

OVERALL CHANGES

ADDED Patterns Tool – A new polyphonic step arpeggiator
FIXED Excessively long wait times when saving/loading DAW projects containing Kontakt
FIXED Corrupted user interface when loading certain older instruments
FIXED If hosted, Kontakt 8 would cause a crash when closing Komplete Kontrol 3
FIXED Blank user interface for Electric Keys Diamond, Phoenix, and Alicia Keys
FIXED Crash when Drag+Drop onto the Rack
FIXED User-saved Multis have incorrect Browser Bank Values
FIXED Erroneous warning message when importing Kontakt content with .ncw files
FIXED File type banner text could spill into the user interface if Kontakt is set to minimum size
FIXED Tempo sync issues between Kontrol S MK3 and Kontakt
IMPROVED Use the modern (Vista and above) file open dialog on Windows when locating Folders

LEAP CHANGES

FIXED Changing sample rate breaks waveform visuals in Leap
FIXED Leap Macros and Save/Load of global presets would break after periods of inactivity in Logic Pro
FIXED Quickly bypassing the amp and releasing a key could cause hanging notes in Leap
FIXED Samples no longer lose sync when set to Legato Playback in Leap
FIXED Time and pre-delay values in Send FX do not report automation correctly in sync mode
FIXED Changing global tonality in Leap was momentarily delayed, causing notes to briefly play in the incorrect key
FIXED Speeding Leap playback Up/Down will throw currently playing loops out of time
FIXED Speed can no longer be set to 0% as this would cause no sounds to trigger
FIXED Playing one-shots in Legato Mode when quantized and in the same choke group can prevent voices from playing in Leap
FIXED Leap samples do not respond to MIDI pitch bend
FIXED Empty slots in Leap are inconsistently grayed out
FIXED Leap sample start/end points are not reset when replacing a sample
FIXED In classic engine mode, switching to non-ping-pong mode can cause a loop to play in reverse with the reverse button not active
FIXED Notes randomly not playing when triggered from the on-screen keyboard in Leap’s Single Mode
FIXED Muzak Macro preset in Leap was saved with incorrect Delay and Reverb Macros
FIXED Toggling sync on/off in delay and reverb FX causes values to jump unexpectedly in Leap
FIXED Position indicator ring displays incorrectly when duplicating a sample in Leap
FIXED Grid is sometimes incorrect after duplicating grids in Leap
FIXED Replacing a file with modified start/end points can sometimes cause start/end points to not display in Leap
FIXED Start marker in Leap can sometimes disappear
FIXED Duplicating a REX file shows, but does not respect or use the start and end points of the copied sample
FIXED “Edit All Samples” in Leap doesn’t work for Perform and Macro FX Toggles
FIXED Anonymous usage data tracking of Leap for opted-in users
ADDED Command+Click sets a parameter to its default value
ADDED Support for BPM and ID3v2 when importing samples to Leap
ADDED Replaced group/single text switches with buttons for better usability
ADDED Time sync parameter for Global FX

TOOLS CHANGES

FIXED MIDI Note Off events not sent for the Chords Tool for notes not in scale

BUILDER CHANGES

ADDED Komplete UI first public release
ADDED Noise options for the Wavetable Modulation Oscillator
ADDED Blend mode for Wavetable source module’s Modulation Oscillator
FIXED Some MIDI CCs interpreted erroneously as CC 0, breaking KSP multi scripts
FIXED Stop writing library.json in binary format
FIXED Changes made when in mono instances of any stereo FX will not be reflected in the second instance when switching mono off via KSP
FIXED Crash in Wavetable Oscillator
FIXED KSP: dont_use_machine_mode() does not bypass TMPro polyphony limitations
FIXED API: get_instrument_options() doesn’t work with encoded instruments

Where are you finding that list?  I only saw the first 5 lines or so in the release notes on Native Access?

 

1

[Author]

Posts